PUDF301 Clamp-on Doppler Ultrasonic Flow Meter

Features:

● Non-invasive Installation,Unnecessary pipe cutting or flow interruption.
● Measuring Accuracy± 0.5% ～±2%F.S.
● Signal Automatic Gain Adjustment.
● Anti-interference Frequency Converter.
● Simple Operation, Only Input Inner Diameter To Realize Flow Measurement.
● 2*8 LCD Display Flow Rate, Volume, Velocity etc.

Get More Information

Product Introduction

PUDF301 doppler clamp-on ultrasonic flow meter is designed for measuring liquid with suspended solids, air bubbles or sludge in a sealed closed pipeline. Non-invasive transducers are mounted outside surface of the pipe. It has advantage that measurement is not influenced by pipe scale or blockage. Simple installation and easy calibration as unnecessary pipe cutting or flow stop.

Whether you are new to flow meters or an experienced operator, the PUDF301 is sure to meet your needs

Measuring Principle	Doppler Ultrasonic
Velocity	0.05 – 12 m/s, Bi-directional measurement
Repeatability	0.4%
Accuracy	±0.5% ~ ±2.0% F.S.
Response Time	2-60 sec (Select by user)
Measuring Cycle	500 ms
Suitable Fluid	Liquid containing more than 100ppm of reflector ( Suspended solids or air bubbles), reflector > 100 micron
Power Supply	Wall mounted
Installation	AC: 85-265V DC:12- 36V/500mA
Installation	Wall mounted
Protection Class	IP66
Operating Temperature	-40℃ to +75℃
Enclosure Material	Fiberglass
Display	2*8 LCD, 8 digits flow rate, volume (resettable)
Measuring Unit	volume/mass/velocity:liter, m³, kg, meter, gallon etc; flow time unit: sec, min, hour, day; Volume Rate:E-2~E+6
Communication Output	4~20mA, Relay, OCT
Keypad	4 buttons
Size	244196114mm
Weight	2.4kg

Transducer

Protection Class	IP67
Fluid Temperature	Std. transducer: -40℃~85℃ High Temp: -40℃~260℃
Pipe Size	40~6000mm
Transducer Type	General standard
Transducer Material	Std. Aluminum alloy, High Temp.(PEEK)
Cable Length	Std. 10m (customized)